Updated November 2026. Sources opened November 22, 2026.
You can install an eSIM without scanning a QR code. There are three ways, and all of them work on the same phone that shows the code: tap an install link, long-press the QR code (iPhone, iOS 17.4 or later), or type the SM-DP+ address and activation code in by hand. Do it on Wi-Fi, and do it once: a used or deleted eSIM profile usually cannot be installed again.
We run Landing eSIM, so read this knowing that. The steps below apply to any eSIM that comes with a QR code, from any provider. Where we describe what the order page shows, that is Landing eSIM's own order page.
The quick answer: which method to use
Start with the install link, fall back to manual entry. The QR code is only needed when a second screen is handy.
| Your situation | Use this | Why |
|---|---|---|
| One iPhone, order page open on it | Install link (tap "Install on iPhone") | One tap opens the phone's own eSIM setup. Apple lists a carrier link as a supported method on iOS 17.4 or later. |
| One Android phone, order page open on it | Install link (tap "Install on Android") | Opens Android's eSIM setup. Support depends on the phone and Android version, so keep manual entry as plan B. |
| iPhone, QR code only shows in an email or browser | Press and hold the QR code, then tap Add eSIM | Apple documents this for iOS 17.4 and later. |
| Install link does nothing, or the phone is older | Manual entry with SM-DP+ address + activation code | Works on any eSIM-capable phone, no camera involved. |
| You have a laptop, tablet or second phone | Show the QR code there and scan it | The classic route. Faster than typing. |
Before you start (all methods)
Three checks stop most failed installs.
- Your phone must support eSIM and be carrier-unlocked. Check the device compatibility page or our guide on whether your phone is eSIM compatible.
- Connect to Wi-Fi. The phone downloads the eSIM profile over the internet. Apple's setup page says to connect to a Wi-Fi network or hotspot first.
- Open your order page. After checkout, your eSIM details are on the order page and in the email we send. You do not need an account.
Method 1: install with the one-tap link
The link method needs no scanning, no typing and no second screen. It is the right first try when you only have one phone.
On Landing eSIM's order page, each eSIM has an Install on iPhone button and an Install on Android button. The page says one tap opens your phone's eSIM setup. The same links are in your email.
- Open the order page or email on the phone that will use the eSIM.
- Tap the button for your phone type.
- On iPhone, tap Allow if an "Activate New eSIM" notification appears, then tap Continue at the bottom of the screen (Apple Support, last updated November 18, 2026).
- Follow the prompts, then label the line, for example "Travel".
- Set the new line for mobile data. Turn Data Roaming on for that line when you arrive.
If nothing opens, you may be using an in-app browser (an email app or social app). Open the order page in Safari or Chrome and tap again. If it still does nothing, go to Method 3.
Method 2: iPhone only, press and hold the QR code
If the QR code is on your iPhone screen, you do not need another device. Apple says that on an iPhone with iOS 17.4 or later, if you receive a QR code in an email app or browser, you can tap and hold it, then tap Add eSIM.
- Show the QR code in your email app or in Safari.
- Press and hold the QR code until the menu appears.
- Tap Add eSIM.
- Tap Continue at the bottom, then Add Cellular Plan.
- If asked for a confirmation code, enter the one your provider gave you.
We have not found a matching official one-step "scan from the screen" option on Android in Google's help pages, so on Android use the install link or manual entry.
Method 3: enter the details manually
Manual entry always works, because it skips the camera and the link. You need two values: the SM-DP+ address and the activation code. Our eSIM terms explained post covers what each one means.
Where to find the details
On the order page, open the "Enter it manually" section under your eSIM. It shows the SM-DP+ address, the activation code and a third line, the full code, labelled for some Android phones. Each has a copy button. They are also in the confirmation email. The full code looks like LPA:1$address$code: the part after LPA:1$ up to the next $ is the SM-DP+ address, and the rest is the activation code.
On iPhone
- Open Settings, then tap Cellular (or Mobile Data).
- Tap Add Cellular Plan (or Add eSIM).
- Tap Enter Details Manually at the bottom of the screen (Apple Support).
- Paste the SM-DP+ address and activation code, then confirm and follow the prompts.
On Google Pixel
Google says that if you did not add your eSIM during phone setup, you can do it later in Settings (Google Pixel Help).
- Open Settings, then Network & internet, then SIMs.
- Tap Add SIM (wording varies), then set up an eSIM.
- When the phone asks you to scan a QR code, choose the option to enter the details yourself instead (wording varies by Android version and phone maker; Google's page does not spell this step out).
- Paste the full code (
LPA:1$...) if the phone asks for one string, or the SM-DP+ address and activation code if it asks for two.
On Samsung Galaxy
- Go to Settings, then Connections, then SIM card manager.
- Tap Add mobile plan.
- Tap Add using activation code.
- Enter the details, then wait for the plan to download (Samsung UK support).
Menu names differ by Samsung region and model, so if your phone says something slightly different, look for "Add eSIM" or "Add using activation code".
What if there is no Wi-Fi?
You need some internet connection for the download, but it does not have to be Wi-Fi. Apple's page lists "a Wi-Fi network or hotspot", and some eSIM-only iPhone models in some countries can activate without Wi-Fi. A hotspot from a friend's phone, or your home SIM's mobile data, also works for a download this small. If you have neither, install before you leave home, which is what we recommend anyway: the order page says to install now on Wi-Fi, because validity starts only when the eSIM first connects at your destination.
Failure modes and fixes
| What you see | Likely cause | Fix |
|---|---|---|
| Install link opens nothing | In-app browser, or a phone that does not support the link | Open the page in Safari or Chrome, or use manual entry |
| "Invalid" or "cannot be added" error | Typo, extra space, or code already used | Use the copy buttons, remove leading and trailing spaces. If the code was used before, see the reinstall question below |
| Phone asks for a confirmation code | Some providers require one | Enter it if your provider sent one |
| No Add eSIM option | Phone not eSIM-capable, or carrier-locked | Check the device list; contact your original carrier about unlocking |
| Installed but no data | Line not set for mobile data, roaming off, or you are not at the destination yet | Switch the eSIM on for mobile data and turn Data Roaming on for it. See troubleshooting help |
| Download hangs or fails | Weak connection | Switch to stronger Wi-Fi, toggle airplane mode, retry |
After the install
Installing is not the same as activating. Name the line, choose it for mobile data, keep your home SIM for calls and texts, and turn Data Roaming on for the eSIM line at your destination. Our step-by-step guides for iPhone and Android cover that part, and how to move an eSIM to a new phone explains what to do when you upgrade. If you want the whole process in one place, see how it works.
Do not delete the eSIM from the phone after installing it. A deleted eSIM can't be reinstalled.
Frequently Asked Questions
Can I install an eSIM without scanning a QR code?
Yes. You can tap an install link, long-press the QR code on an iPhone running iOS 17.4 or later, or enter the SM-DP+ address and activation code manually in your phone's eSIM settings. Manual entry works on any eSIM-capable phone and needs no camera.
Where do I find the activation code?
On a Landing eSIM order, open your order page and expand "Enter it manually", or check the confirmation email. You will see the SM-DP+ address, the activation code and the full code. Other providers put the same details in their email or app, usually in a section with a similar name.
Can I install an eSIM on the same phone that shows the QR code?
Yes, but you cannot point the camera at your own screen. Use the install link, long-press the code on iPhone (iOS 17.4 or later), or type the details in manually. Alternatively, show the code on a laptop, tablet or second phone and scan it from there.
Do I need Wi-Fi to install an eSIM?
You need an internet connection to download the profile, and Wi-Fi is the safest choice. Apple lists a Wi-Fi network or hotspot. A mobile connection from your home SIM may also work, though Apple does not list it. Install before you travel so you are not hunting for a connection at the airport.
Can I reinstall the same eSIM?
Usually not. Most eSIM codes are single-use, and our help centre says a deleted eSIM can't be reinstalled. If a code shows as already used, check your phone's cellular settings first: it may already be installed. If it is not, contact support with your order number.
Install it before you fly
Pick your destination on the eSIM store, check out without an account, and your eSIM, QR code, install links and manual details are ready in seconds. First order? Use code WELCOME10 for 10% off.
