Skip to content
Landing eSIM
eSIM basics

eSIM Terms Explained: EID, ICCID, IMEI, SM-DP+, LPA and APN

A plain-English glossary of eSIM terms: what EID, ICCID, IMEI, SM-DP+, LPA, activation codes and APN mean, where to find them and when you need them.

By the Landing eSIM editorial teamUpdated 10 min readChecked against official sources

Key takeaways

  • IMEI identifies your phone, EID identifies the eSIM chip inside it, and ICCID identifies one SIM or eSIM plan.
  • To install an eSIM by hand you normally need an SM-DP+ address and an activation code, plus a confirmation code if your provider requires one. A QR code holds the same details.
  • APN is the setting that tells your phone how to reach the mobile data network. Most eSIMs set it for you, so change it only if your provider tells you to.
  • Find your IMEI by dialing *#06#, or in Settings > General > About on an iPhone and Settings > About phone on a Pixel. The EID is in the same screens, under SIM status on a Pixel.
  • Treat QR codes, activation codes and confirmation codes like passwords, and share device numbers only with your provider.

A handful of terms turn up in almost every eSIM instruction: IMEI, EID, ICCID, SM-DP+, LPA, activation code and APN. In short, the IMEI is the number of your phone, the EID is the number of the eSIM chip inside it, the ICCID is the number of one plan on that chip, the SM-DP+, LPA and activation code are the pieces that download the plan, and the APN is the setting that connects it to mobile data.

This guide explains each one in plain English, shows where to find the numbers on your phone, and says which ones you actually need.

The terms at a glance

TermWhat it meansWhere you’ll meet it
IMEIThe 15-digit number that identifies your phoneCompatibility checks, unlocking, lost or stolen phones
EIDThe permanent ID of the eSIM chip in your phoneSome providers ask for it when you buy or move a plan
ICCIDThe ID of one SIM or eSIM planSupport requests, and telling two plans apart
eUICCThe chip that stores eSIM plansPhone specs and technical guides
ProfileOne carrier’s plan, stored on the chip (Apple calls it a cellular plan)Android and technical guides
SM-DP+The provider’s server that prepares and delivers your planManual install: “SM-DP+ address”
LPAThe software in your phone that downloads and manages plansThe start of an activation code: LPA:1$
Activation codeThe text (or QR code) that says which plan to download, and from whereYour install email or order page
Confirmation codeAn extra code some providers require before the downloadAt install, only if your provider uses one
APNThe network path your phone uses for mobile dataMobile data settings and troubleshooting

IMEI: the number that identifies your phone

The IMEI (International Mobile Equipment Identity) is a 15-digit number: 14 digits plus a check digit. The first eight digits, the Type Allocation Code, identify the model and where it came from. It belongs to the handset, not to your SIM or eSIM, so installing a new plan doesn’t change it.

Why it matters: carriers and eSIM providers can use it to check that a phone is compatible, operators can blocklist the IMEI of a lost or stolen phone, and some countries ask visitors to register their phone by IMEI (see the Turkey eSIM guide). Phones that support two lines can show two IMEIs. On a Pixel with both an eSIM and a physical SIM, each SIM type has its own IMEI, and Google notes that your carrier may ask for the second one when setting up an eSIM.

How to find your IMEI

  • Any phone: open the dialer and enter *#06#.
  • iPhone: Settings > General > About, then scroll down to the IMEI. Apple also lists your Apple Account device list, Finder and the original box.
  • Pixel: Settings > About phone > IMEI. For the second SIM type, turn on Dual SIM Dual Standby and look for IMEI (SIM slot 2).
  • Other Android phones: usually Settings > About phone, though the exact path varies by brand.

EID: the number that identifies your eSIM chip

Every eSIM phone contains an eSIM chip, known as an eUICC. It is programmed at the factory with a permanent ID, the EID (eUICC identifier). GSMA, the mobile industry body that writes the eSIM standards, describes it as a 32-digit number.

Provisioning systems use the EID to link a plan to a particular chip, which is why some providers ask for it when you buy a plan or move one to a new phone. It stays the same when you add, remove or change plans.

How to find your EID

  • iPhone: Settings > General > About, then scroll down to EID.
  • Pixel: Settings > About phone > SIM status > EID.
  • Other Android phones: look in About phone or its SIM status screen. The path varies by brand.

ICCID: the number of one SIM or eSIM plan

The ICCID (Integrated Circuit Card Identifier) identifies a SIM card, and also an eSIM profile: every eSIM plan you install has its own. In practice ICCIDs are 19 or 20 digits long, and in telecoms they start with 89.

Because it belongs to the plan rather than the phone, a second eSIM gives your phone a second ICCID while its IMEI and EID stay the same. It’s the number to quote when you contact support about a particular plan. On an iPhone it is listed on the same About screen as the EID and IMEI, and on our site the eSIM’s page in your account shows it with the install details.

Three numbers, three different things.
NumberIdentifiesChanges when you add a new eSIM plan?Digits
IMEIYour phone (the handset)No15
EIDThe eSIM chipNo32
ICCIDOne SIM or eSIM planYes, each plan has its own19 or 20 in practice

SM-DP+, LPA and the activation code: how a plan gets onto your phone

Behind every eSIM install is a standard process from GSMA called Remote SIM Provisioning. Three pieces of it matter to you:

  • SM-DP+ (Subscription Manager – Data Preparation) is the provider’s server. Android’s developer documentation describes it as a remote service that prepares, stores and delivers profile packages to devices. Its web address is the SM-DP+ address.
  • LPA (Local Profile Assistant) is software built into your phone. It manages the plans on the chip and acts as the bridge between the SM-DP+ server and the eSIM chip.
  • Activation code is the text that tells the LPA which server to contact and which plan to download. A QR code is the same information as a picture.
  1. Scan

    Your phone reads the QR code, which contains the activation code.

  2. Connect

    The LPA contacts the SM-DP+ server named in the code, over Wi-Fi or mobile data.

  3. Download

    The server sends your plan to the eSIM chip.

  4. Switch on

    You turn the plan on in your phone’s settings. Some carriers also need to activate it on their side.

What an activation code looks like

Written out, an activation code usually looks like LPA:1$smdp.example.com$ABCD-1234-EFGH. After LPA:1$ comes the SM-DP+ address, then another $, then the activation code, sometimes called the matching ID. Some providers leave out the LPA: prefix and some add extra fields at the end. The format is defined in GSMA’s SGP.22 specification. That example is made up, so don’t try to install it.

If a QR code won’t scan, you can type the details instead. On an iPhone, open Add Cellular Plan and tap Enter Details Manually. On Android, look for an option such as Enter activation code. Our step-by-step guides cover both: iPhone and Android.

What is a confirmation code?

Some providers also require a confirmation code, a separate code you enter before the plan downloads. Apple’s instruction is to enter the number your carrier provided. If you aren’t asked for one, you don’t need one.

Some carriers can even install an eSIM on an iPhone automatically, with no QR code. Apple calls this eSIM Carrier Activation, and it needs iOS 16 or later.

APN: the setting that connects you to mobile data

An APN (Access Point Name) tells your phone which network path to use for mobile data. Apple describes it as the path that all of your phone’s cellular data uses. You rarely need to touch it: on iOS 16 and later, carriers that support it can fill in the APN settings automatically when you insert a SIM or set up an eSIM, and most phones set it up on their own. Your provider’s instructions will tell you if you need to enter one.

Where to find it

  • iPhone: Settings > Cellular > Cellular Data Network. Apple notes this only appears if your carrier allows it.
  • Pixel: Settings > Network & internet > SIMs, then your SIM’s settings, where Google lists Access point names.
  • Other phones: the path varies. Search your settings for “APN” or “Access point names”.

When to change it, and when not to

  • Change it only if your provider tells you to, and enter the values exactly as given.
  • Apple warns that incorrect settings can cause a loss of cellular data and extra charges.
  • On iPhone, updating iOS resets any APN changes you made by hand, unless you use a configuration profile. You may need to enter them again.

No data after installing an eSIM? Check these before the APN

  1. Make sure the eSIM line is on and selected for mobile data.
  2. For a travel plan, turn on data roaming for the eSIM line. See what is data roaming.
  3. Switch Airplane Mode on for ten seconds and off again, or restart the phone.
  4. Check that you’re in a country the plan covers and that it has started and still has data.
  5. Only then check the APN, using exactly what your provider says.

Other terms you may see

  • eUICC: the eSIM chip itself (embedded universal integrated circuit card). Android’s documentation notes that plans from different carriers can be stored on it side by side.
  • Dual SIM: two lines active on one phone, for example an eSIM plus a physical SIM, or two eSIMs. Pixel calls its version Dual SIM Dual Standby (DSDS).
  • Carrier-locked / unlocked: whether your phone is tied to one carrier. See how to check if your phone is unlocked.
  • Hotspot (tethering): sharing your phone’s mobile data with other devices.

Which number do you need?

SituationWhat you need
Checking whether a plan will work on your phoneYour phone model, and sometimes the IMEI or EID
Installing by QR codeNothing. Just scan it
Installing by handThe SM-DP+ address and activation code, plus a confirmation code if asked
Asking support about a particular planThe ICCID, or your order number
Moving a plan to a new phoneYour provider may ask for the new phone’s EID or IMEI. See how to transfer an eSIM
Reporting a lost or stolen phoneThe IMEI
No mobile data after installThe APN, but only after the basic checks above

Not sure what your favourite app asks for? See how WhatsApp, Telegram and Google handle verification codes abroad.

Ready for your first eSIM?Pick a plan for your destination and install it in minutes.Browse eSIMs

Frequently asked questions

  • The IMEI identifies your phone, the EID identifies the eSIM chip inside it, and the ICCID identifies one SIM or eSIM plan. Installing a new eSIM plan adds a new ICCID but doesn’t change your IMEI or EID.

  • It is the web address of the server that delivers your eSIM plan. You only need to type it, together with the activation code, if the QR code can’t be scanned.

  • LPA stands for Local Profile Assistant, the software in your phone that downloads and manages eSIM plans. An activation code usually begins with LPA:1$, followed by the SM-DP+ address and your activation code.

  • No. The activation code identifies your plan and the server to download it from. A confirmation code is an extra code some providers require before the download. Only enter one if your provider gave you one.

  • On an iPhone, go to Settings > General > About and scroll down. On a Pixel, go to Settings > About phone > SIM status. On other Android phones, look in About phone or its SIM status screen, since the path varies by brand.

  • An APN is the network path your phone uses for mobile data. Most eSIMs set it up automatically, so only change it if your provider tells you to, and enter the values exactly as given.

  • No. You only need it to tell your provider which plan you mean when you contact support.

  • Share them with your carrier or eSIM provider when they ask, since they use them for compatibility checks and activation. Avoid posting them publicly, and never share your activation or confirmation codes.

Browse eSIM plansInstall in minutes. No SIM tray, no counter.

Sources and further reading

Device and carrier support changes often. If something here is out of date, please tell us and we will correct it. Read how we work in our editorial policy.

Share this guide

Keep reading

The app

We've got you covered, wherever

Buy, manage and top up eSIMs on the go. Until the apps ship, everything works in your browser at landingesim.com.

Coming soonApp StoreComing soonGoogle Play